3
OPTIONAL ACCESSORIES SETUP:
4
. Remove the optional high volume vacuum
system, saliva ejector system, and High-
Density Polyethylene (HDPE) water supply
tank from packing and install on proper quick
disconnects on the delivery head (Fig. 1)
5a.
To install the optional vacuum bottle, press
on locking-ring tab (Fig. 3a), push bottle
into quick coupler, and release tab.
5b.
Hang the
vacuum head in
the holder at the
right hand end
of the front
holder rack
(Fig. 3b).
6a.
To install the saliva ejector system, locate
the quick disconnect at the rear of the
delivery head (Fig. 4a). Note manual
release lever on disconnect. Insert metal
fitting on top of bottle into quick disconnect.
Locking ring will snap into place. Press
release lever on disconnect to remove
bottle from unit (Fig. 4b).
6b.
Insert vacuum line hose into plastic quick
disconnect on top of bottle (Fig. 4c). Hang
the saliva ejector valve in the holder located
next to high volume vacuum handpiece.
7.
To install optional water supply bottle,
thread it into the white plastic fitting at the
right rear corner of the chassis (Fig. 5).
Figure 3b
Figure 4a
RELEASE
LEVER
Figure 4b
Figure 4c
QUICK
DISCONNECT
VACUUM
LINE
HOSE
Figure 5
QUICK DIS-
CONNECT
VACUUM BOTTLE
LOCKING
RING TAB
Figure 3a