2
1.
Place the ADU-25 Custom cart in an
upright position on a flat, stable surface.
Loosen the center column retaining knob
and extend the telescoping upper portion.
Tighten the knob at the desired height
(Fig. 1).
2.
Check to make sure the syringe, highspeed
and lowspeed handpieces are hanging in
their proper holder. Locate the foot control
on the floor (Fig. 1).
HANDPIECE
PRESSURE
GAUGE
AA-21
HIGH VOLUME
VACUUM
SYSTEM
(Optional)
THREE-WAY
SYRINGE
NWS-8 HDPE
WATER SUPPLY
TANK (Optional)
HIGHSPEED
HANDPIECE
CONTROL
AA-25 SALIVA
EJECTOR
SYSTEM
(Optional)
REMOVABLE
INSTRUMENT
TRAY
3.
The ADU-25 unit must be connected to a
dry, filtered, 70-100 psi air source. Simply
extend the 1/4" grey air supply line from
the ADU-25 cart and connect the quick-
disconnect into the compressed air source
(Fig. 2)
LOWSPEED
HANDPIECE
CONTROL
TELESCOPING
CENTER
COLUMN WITH
RETAINING
KNOB
FOOT
CONTROL
Figure 1.- ADU-25 Custom Cart with Options
SETTING UP THE SYSTEM:
Figure 2 - Air Supply Connector
CONNECT TO
70-100 PSI
AIR SOURCE