Aseko ASIN AQUA Salt, User Manual

Page: 18 / 48

EN 18
Power Supply
Connection to the mains:
1.
Leave the mains switch in the off position.
2. Connect the fi ltering device to the ASIN AQUA Salt switched socket outlet
(fi ltration power supply - max. 1.4 kW / 230 VAC).
3.
Connect the 230 V / 50 Hz mains cable to ASIN AQUA Salt (on the right side).
The mains socket outlet must be protected by a residual current device
(RCD).
4. Change the mains switch over to the on position.
After Device has been switched on, the display will come on and the ASIN AQUA
Salt starting screen will appear.
Disconnection from the mains:
1.
Change the mains switch over to the off position.
2. Disconnect the ASIN AQUA Salt mains cable from the 230 V / 50 Hz socket
outlet.
3.
Disconnect the fi ltering unit mains cable from ASIN AQUA Salt.
WARNING:
If Device is used in the manner diff erent from that specifi ed by the
manufacturer, protection provided by Device may get damaged.
Power supply 230 V AC 50 – 60 Hz
Power consumption out of pump 190 VA
Total power consumption 1840 VA
Unit fuse T8A
Inner electronic fuse T125 mA
Supply of external sensors fuse T800 mA
Ingress protection IP30
Over-voltage category II
Operating temperature +5 to + 40°C
Relay output contacts max. 230V/1A voltage free
Thermometer max diff /– 1,5°C
Clorine processing power (salt 4g/l) TE–25, 20 g Cl/ h
Filter pump power supply 1,4 kW , 230 V AC
Power of dosing pumps 60 ml/min. by overpressure
1,5 bar
(pH, Algaecide) 1,5 bar
Measuring water max pressure 1,5 bar
Dimensions 450 x 330 x 150 mm
Weight 10 Kg
Installation must be
protected by a residual
current device (RCD).
RCD
Proudový
chránič
30 mA
Max 1,4 kW
230 v~
230 V / 50 Hz
Residual
current device,
30 mA
230 V / 50 Hz
Max. 1,4 kW
230 V~