background image

11

EN

CAUTION:

Full-surface occupancy of the storage levels is not permitted.

IO90.195.120.K3.WDC:

The following substances must not be stored in the cabinets with fi re suppression system:

Acids, bases, magnesium, other metals (in powder form).

Heat is generated during the charging of a lithium-ion battery!
Please note:

The technical ventilation (to avoid heat accumulation in the interior) needs to be kept in 

operation permanently.

Li-Ion Li-Ion

150 mm

CAUTION:
A distance of min. 150 mm must be maintained in the area in 
front of the fi re suppression unit.

7.   VENTILATION

7.1.   EXTRACTION UNIT (IO90.195.120.K3.WDC)

• 

 See point 10.1

 for the installation.

The green indicator lamp signals that the fan is switched on.

ATTENTION:
Heat is generated during the charging of a lithium-ion battery!
Please note:

The technical ventilation (for the avoidance of heat accumulation in the interior) must run continuously
Repairs to the extraction unit are only to be carried out by specialists specifi cally trained for this. Given 
damage the appliance is to be repaired or replaced by the manufacturer.

7.2.   FAN (IO90.078.059.057.U9.S)

• With model IO90.078.059.057.U9.S,

a fan is permanetly mounted on
the rear of the cabinet.

8.  BATTERY FIRE • EVENT OF FIRE • DISPOSAL

CAUTION

After a battery fi re and triggered fi re suppression device, the safety cabinet must be subjected to a thorough 
inspection so that both fi re protection and CE conformity are maintained. For this purpose, the cabinet 
must be handed over to the main factory of asecos GmbH in Gründau, where the specialist department 
- depending on the degree of damage - makes an assessment of the economic effi  ciency and technical 
possibilities of a repair. The customer then receives an off er of either a repair or a replacement, which can 
be handed over to the responsible property insurer.

Summary of Contents for IO90.078.059.057.U9.S





























Reviews: