AH30
Ascom Hasler Mailing Systems, ® Inc.
08/99
This manual is a non-controlled document.
This manual has been carefully compiled and checked for accuracy. Information in this
manual does not constitute a warranty of performance. Furthermore, Ascom Hasler
Mailing Systems, ® Inc. reserves the right to revise this publication and make changes
from time to time, in its content.
Ascom Hasler Mailing Systems, ® Inc. ASSUMES NO LIABILITY WHAT SO EVER
FOR ANY LOSSES OR DAMAGES INCURRED AS A RESULT OF OUT-OF-
DATE OR INCORRECT INFORMATION CONTAINED IN THIS MANUAL.
This publication contains information proprietary and confidential to Ascom Hasler
Mailing Systems, ® Inc. Any reproduction, disclosure, or use of this publication is
expressly prohibited except as Ascom Hasler Mailing Systems, ® Inc. may otherwise
authorize in writing.
WARNING! STATIC SENSITIVE DEVICES
Proper Handling and Grounding Precautions Required
This equipment contains electrostatic sensitive devices. Use ESD precautionary
procedures when removing or inserting parts or printed circuit (pc) cards. Keep parts
and pc cards in their anti static packaging material until ready to install.
The use of an anti static wrist strap, connected to the grounded equipment frame or
chassis, is recommended when handling pc cards during installation, removal, or setting
of on-board option switches. Do not use a conductive tool, such as a screwdriver or
paper clip, to set the position of the option switches.
This equipment generates, uses, and can radiate radio frequency energy and if not
installed and used in accordance with the instruction manual, may cause interference to
radio communications. It has been tested and found to comply with the limits of Class
A computing devices pursuant to Subpart J of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely to
cause interference, in which case the user at his/her own expense will be required to
take whatever measures may be required to correct the interference.
The operator should not service this equipment. Only trained service personnel should
open and service this equipment. Contact your local Ascom dealer for assistance.
Publication
Notice
Proprietary
Notice
ESD
Precautions
CAUTION