Technical Information
AH30
Page C-4
08/99
Ascom Hasler Mailing Systems, ® Inc.
The following should be done to set up the PC:
Step
Action
Comments
1
Run WINDOWS
2
Select the PROGRAM MANAGER.
3
Select TERMINAL.
4
Select SETTINGS.
5
Select COMMUNICATIONS.
6
Select the COM PORT to use.
Select 9600 for BAUD RATE.
Select 8 for DATA BITS.
Select 2 for STOP BITS.
Select NONE for PARITY.
Select OK.
The COM PORT select should be the
same as the one that the cable from the
AH30 is connected to.
7
Select SETTINGS.
8
Select BINARY TRANSFERS.
9
Select KERMIT.
Select OK.
PC Setup
Using
Windows