Technical Information
AH30
Ascom Hasler Mailing Systems, ® Inc.
08/99
Page C-3
The following should be done to set up the AH30:
Step
Action
Comments
1
Connect the PC interface cable from
the AH30 back port (labeled “PC”) to
the proper port on the back of the PC.
2
Press the [SET UP] key on the AH30.
3
Use the [
] to select [I/O Setup]
and press the [ENTER] key.
4
Use the [
] to select [PC Protocol]
and press the [ENTER] key.
5
Select either [ASCI] or [Krmt] by
pressing the appropriate [F1] through
[F4] softkey.
ASCII protocol does not provide any
error handling. The format is printer
compatible so that the output can be
sent to a printer.
KERMIT protocol provides error
handling while transferring data. It
requires a communication package that
supports KERMIT on the PC.
6
Press the [EXIT/PR.MENU] key.
7
Use the [
] to select [Serial Port 1]
and press the [ENTER] key.
8
Select [Baud Rate].
Select [9600].
Press the [EXIT/PR.MENU] key.
9
Select [Stop Bits].
Select [Two].
Press the [EXIT/PR.MENU] key.
10
Select [Parity].
Select [None].
Press the [EXIT/PR.MENU] key.
11
Select [Length].
Select [8].
Press the [EXIT/PR.MENU] key.
AH30
Setup
PC
Interface
