Guideline for safety and efficiency
Cordless telephone OfficeT
2006-05-24/ Ver. B
6
TD 92282GB
FCC compliance statements
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
Modifications
Modifications not expressly approved by Ascom could void the
user's authority to operate the equipment.
Warranty notification
Do not disassemble the telephone. Disassembling the telephone
voids the warranty. The OfficeT Cordless telephone consists of no
consumer serviceable components. Service should be performed
only by Authorized Service center.
Battery care
•
Do not leave a battery where it could be subjected to extremely
high temperatures, such as inside a car on a hot day.
