Networking
Cordless telephone OfficeT
2006-05-24/ Ver. B
74
TD 92282GB
To subscribe to a Cordless telephone to speed up the
subscription process
Route:
Networks » Subscribe
Subscribe
Select
Press
“Enter PIN:”, “BasePIN”, “Enter AC:” or “Subscr” is displayed.
“List Full” is displayed, when your Cordless telephone already has
eight subscriptions. In this case, you have to delete a subscription
before you can add a new one.
z
If requested, enter the PIN code for the phone and press
(See section “
Overview PIN and other codes
” on page 57).
“BasePIN:” or “Enter AC:” is displayed.
z
Press and then enter the BasePIN or authentication code of
the network
Press to proceed
Each digit of the BasePIN or AC number that you enter is shown
only as * for security purposes.
z
Enter the PARK code of the system and press
z
Enter a protection code
0 = no protection, 1 = protection
Note! When you enable protection it is no longer possible to delete
the subscription via the Cordless telephone.
Press to confirm
The Cordless telephone now looks for a network in subscription
mode using the BasePIN or AC number to test if it is allowed to
subscribe.
Wait until
Subscription Ready
is displayed for a short time
The Cordless telephone is connected to the network. You can see
its internal phone number on the display.
If you get the following message, try to subscribe again:
•
“Subscription Failed:” the BasePIN, AC number or PARK code
you have entered does not match the network BasePIN, AC
number or PARK code, or the network cannot add another
subscription.
Work 132
01-Dec 11:32
