23
Cordless telephone OfficeT
2006-05-24/ Ver. B
TD 92282GB
Getting Started
Making and receiving calls
If your Cordless telephone is switched on, and connected to a
telephone network, you can make and receive calls. Check if a
network name is displayed and one or more bars of the signal
strength icon are on. If not, see section “
Networking
” on page 70 or
contact your system administrator or supplier.
Making a call
After switching on, the Cordless telephone is in stand-by mode. In
this mode the Cordless telephone is ready to make calls.
Dialling while on hook:
Enter the number
The number is displayed.
Press when the number is correct
Press to end the call
The duration of the call is displayed.
Dialling while off hook:
Press and hold and wait for the dial tone
Note:
A short press activates the CallList.
z
Enter the number and wait for a connection
Press to end the call
The duration of the call is displayed.
00535554505
0:00:23
00535554505
