ASCOM IP-DECT Installation And Operation Manual Download

Page: 43 / 75

TD 92372GB

2007-06-18/ Ver. E

Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway

7.2.3

Dynamic IP address via DHCP

The Slaves can have dynamic IP address allocation if the network has an DHCP server.

Select LAN > DHCP.

Select “Client” in the

Mode

drop-down list.

Click “OK”.

Reset in order to make the changes take effect, see

7.12

Reset

on page 60.

7.2.4

Link

The link setting should be set to "auto" under all normal circumstances.

7.2.5

Configure VLAN

Identity and priority settings for VLAN are done in the "LAN > VLAN" sub menu.

Note:

It is necessary to have a VLAN with the same ID as configured in the IPBS/IPBL

otherwise it will not be possible to access the IPBS/IPBL.

7.2.6

View LAN Statistics

To view statistics of LAN events: Select LAN > Statistics

To reset the ethernet statistics counters: Click the

clear-stat

button.

Summary of Contents for IP-DECT












































































Search results

Summary of Contents for IP-DECT

Reviews:

Related manuals for IP-DECT

Brands by name

Popular brands

ASCOM IP-DECT, Installation And Operation Manual

Search results

Summary of Contents for IP-DECT

Reviews:

Related manuals for IP-DECT

Brands by name

Popular brands