ASCOM IP-DECT Installation And Operation Manual Download Page 9

Page: 9 / 75

TD 92372GB

2007-06-18/ Ver. E

Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway

2.1.2

IP-DECT Base Station with External Antennas

The IPBS is available with two omni-directional external antennas. Other external antennas
can be mounted as well. This section contains the differences between the IPBS with
internal and external antennas. For all other information see

2.1.1

IP-DECT Base Station

with Internal Antenna

on page 2.

Contents of the Box

The box in which the IPBS is packed contains:

• An IPBS for external antennas

• Two antennas

• A mounting bracket

• Two screws with wall plugs

Note:

The IPBS cannot be mounted with the antennas pointing downwards as the

mounting bracket does not support it.

Insert the antennas into the IPBS before following the installation instructions in

Summary of Contents for IP-DECT












































































Search results

Summary of Contents for IP-DECT

Reviews:

Related manuals for IP-DECT

Brands by name

Popular brands

ASCOM IP-DECT, Installation And Operation Manual

Search results

Summary of Contents for IP-DECT

Reviews:

Related manuals for IP-DECT

Brands by name

Popular brands