30
20BA312004/A0_en
Operation with several handsets
Introduction
The Ascom Avena 122/Ascom Avena 122
plus allows you to operate up to 6 hand-
sets on one base station. You can make
two internal calls between two handsets
and one subscriber can also make an out-
side call at the same time. Each additional
handset must be registered with the base
station and obtain an internal subscriber
number. Each internal subscriber number
(1-6) can only be allocated once. It is indi-
cated on the handset display when the
handset is switched to ON. The base sta-
tion is allocated call number 8.
Note:
If during operation with several handsets
one of the handsets seizes the outside line,
an internal busy tone is heard, in which case
you can still make internal calls. Your hand-
set can be registered with a maximum of 4
base stations.
Preparing the base station for
registration:
˜
Press down the internal key on the
base station for five seconds.
The connection indicator on the base sta-
tion (red LED) starts flashing.
The base station is now on standby for 60
seconds to enable you to register a hand-
set.
Registering a handset
You can register other handsets to the base
station or register your own handset to
another base station.
Handset switched to ON
1.
‚‚
2.
901
Key in the system PIN or "0000"
(default setting).
3.
Key in the new internal call number
for the handset (1 to 6), e.g. 3
4.
Determine the designation for the
base station, e.g. press key 2 for
base station A, key 5 for base
station B, key 8 for base station C
or key 0 for base station D.
5.
‚
You hear the audible acknowledge-
ment tone.
The letter symbol flashes.
The handset connects briefly with
the base station.
You hear an acknowledgement
tone and the letter symbol stops
flashing.
Notes:
If the internal call number is seized a sec-
ond time, the handset first registered on it
is de-registered.
If the registration process fails, an error tone
is heard and the letter symbol on the base
station continues to flash.
