A - 8
Certificate of Conformity
Appendices
EU Declaration of Conformity
Product:
Name of Manufacturer:
Telephone
e-mail
Website
Load Bank
N J Froment & Company Limited,
Easton-on-the-Hill, STAMFORD, PE9 3NP,
United Kingdom
+44 (0)1780 480033
[email protected]
www.froment.co.uk
Country of Origin
United Kingdom
This declaration of conformity is issued under our sole responsibility of the manufacturer
Object of Declaration:
Load Bank Types: 3000 Series
6000 Series
8000 Series
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
2006/42/EC
Machinery Directive
2014/30/EC
Electromagnetic Compatibility Directive
2014/35/EU
2011/65/EU
EC 1907/2006
Low Voltage Directive
RoHS Directive – EEE Category 9.
REACH
References to the relevant harmonised standards used or references to the other technical
specifications in relation to which conformity is declared:
EN60204-1:2006+A1:2009
EN 61000-6-3:2001
EN 61000-6-2:2001
Safety of Machinery. Electrical Equipment of Machines.
Electromagnetic Compatibility. Generic Emission Standard.
Electromagnetic Compatibility. Generic Immunity Standard.
Basis of self attestation:
Quality Assurance to BS EN ISO 9001:2015
Registered Firm Certification No: FM 38927
Signed for and behalf of:
N J Froment & Company Limited
Place of Issue:
Easton-on-the-Hill, STAMFORD, UK
Date of Issue:
17
th
May 2019
Name & Position:
J.W. Barratt Managing Director
Signature:
One copy of this declaration accompanies each load bank,
for customer retention
A - 9
Appendices
Electromagnetic Compatibility
This equipment has been designed and constructed to comply with the European
Community Directive 89/336/EEC. To ensure that the requirements of the Directive and
related standards are satisfied it is essential that the equipment is used as intended and in
full accordance with the operating instructions.
Immunity to external interference (EN 61000: Part 6)
•
This equipment will not suffer permanent damage, or become dangerous or unsafe as
a result of electromagnetic interference at the levels set in the standards. Normally it
will continue to operate as intended. Electrostatic discharges or breaks in the power
supply may cause the equipment to shut down until it is manually re-set and re-started.
•
Exposure to higher levels of electromagnetic disturbance, above the prescribed limits
(for example by the operation of a hand-held transmitter close to the remote controller)
may result in out-of-tolerance readings on the instrumentation.
Electromagnetic emissions (EN 61000: Part 6)
•
Electromagnetic disturbances generated by this equipment do not exceed the
prescribed levels that could cause interference to radio, telecommunications or
television reception apparatus. There will be no interference provided the reception
equipment itself is constructed and used in accordance with the applicable standards,
and its antenna is located more than 10 metres away.
•
If highly susceptible apparatus is used nearby, particularly if its faulty operation could
cause danger, then you must take additional measures to minimise the risks.
•
This test equipment is intended to cause controlled changes in the load on an electrical
power supply. Such tests may result in disturbances in the Supply-on-Test that are
outside prescribed limits. If susceptible apparatus is connected to the Supply-on-Test,
particularly if its faulty operation could cause danger, then it should be switched off, or
disconnected, during the tests.
