USB Driver Installation
The driver for the virtual serial port must be installed before
the software can be used. Drivers for all supported operating
systems are included with the device. They can be found in the
"Driver" directory on the CD.
Software Installation
The PC software can be found in the "Software" directory.
Execute setup.exe to install the software. There is also a
portable version of the software in the "Portable Software"
directory that does not require installation.
Note: The .NET-Framework (at least version 4.0) must be installed prior to the software
installation.
Software Operation
1. Connect the AE20204 to the PC using a RS232 or USB
cable.
2. Launch the software
3. Select the (virtual) COM port the device is connected
to.
4. Press "OPEN"
If the connection is successful, the status bar will show
"Receiving data". The measurement mode and the actual
reading is shown. Check "Logging enabled" to log the values.
The logged values can be deleted by pressing "Clear" or saved
with "Save to file..." in the csv format (Comma Separated
Values). Various software like Microsoft Excel® can be used
with these files. Press "Close" to close the connection.
30
