Asante AsanteFAST 100 User Manual Download Page 50

Page: 50 / 74

Menus

Page 4-6

Ports

This menu provides read-only and configurable information for each
port on the device.

Table 4-5 describes each field in the Ports menu.

∆

Note:

For instructions on using this menu, see “Enabling/

Disabling Ports” on page 3-17 and “Partitioning a Port” on
page 3-19.

Table 4-5 Ports Menu

Field

Description

Group Index

Read-only field; displays the number of the group to
which the selected port belongs.

Port Index

Read-only field; displays the number of the port for
which information is displayed.

Port Type

Read-only field; displays the type of connector on the
port (for example, RJ-45).

Link Status

Read-only field; displays if a device is connected to
the selected port.

❏

linkon — a device is properly connected to the

selected port and is powered on.

❏

linkoff — a device is not connected to the port.

AutoPort Status

Configurable field; displays the automatic partitioning
status of the selected port.

❏

autopartitioned — the port is configured for

automatic partitioning.

❏

noautopartitioned — the port is not config-

ured for automatic partitioning.

See “Partitioning a Port” on page 3-19 for instruc-
tions.

Jabber Status

Read-only field; displays the status of the Jabber
Detector (a device that helps prevent a node from
transmitting constantly; for example, if the node is
malfunctioning).

❏

on — jabber detector is on.

❏

off — jabber detector is off.

100NMM PM book Page 6 Wednesday, August 27, 1997 12:40 PM

Summary of Contents for AsanteFAST 100











































































Search results

Summary of Contents for AsanteFAST 100

Reviews:

Related manuals for AsanteFAST 100

Brands by name

Popular brands

Asante AsanteFAST 100, User Manual

Search results

Summary of Contents for AsanteFAST 100

Reviews:

Related manuals for AsanteFAST 100

Brands by name

Popular brands