2
EN
ASAHI Corsair Armet
Microcatheter
Instructions for Use
For single use only
Read these instructions carefully before use and observe the Indications for Use,
Contraindications, Warnings, Precautions, Malfunction and Adverse effects and How to Use
sections in the Instructions for Use. Failure to do so may result in complications, including
serious injury to the patient or death.
These Instructions for Use apply to the ASAHI Corsair Armet. For specifications of the respective
product, refer to the product label.
Descriptions
This product consists of a distal tip, a shaft tube, a protector and a connector. The distal tip and
distal side of shaft are coated with hydrophilic coating on the outer surface.
The tip is radiopaque, and the distal end is clearly distinguished by the tip.
Indications for Use
The ASAHI Corsair Armet is intended to provide support to facilitate the placement of guide wires
in the peripheral vasculature, and can be used to exchange one guide wire for another.
The ASAHI Corsair Armet is also intended to assist in the delivery of contrast media into the
peripheral vasculature.
This device is not intended for use in
coronary vasculature and
neurovasculature.
Contraindications
・
None
Warnings
This microcatheter is for single use only. Do not reuse or resterilize.
If reused or resterilized, the performance or quality of this microcatheter may be compromised and
there is a risk of complications,including infection.
1)
Do not use this microcatheter in advanced calcified lesions.
2)
Do not use this microcatheter in lesions through strut of stent.
3)
Do not use oleaginous contrast media. (The device may be damaged.)
4)
The microcatheter must not be used for drug infusion, except for the contrast media. (The
microcatheter is not designed for drug infusion except for the contrast media and its safety has
not been established.)
Shaft
Connector
Tip
Protector
Hydrophilic coating
