2
Injection Hazard
<<General Safety Precautions>>
●
This is a high-pressure painting equipment and an extreme care should be exercised to prevent
serious personal injury.
This pump generates very high pressure to feed paint fluid to the airless spray gun.
High-pressure spray or ruptured component pieces from point-blank range can inject fluid or
fragments into your body, causing skin injury from which no small amount of toxic substances might
enter into the body.
Should that happen, get a proper medical treatment by a specialist, immediately.
If you don’t, you may suffer from a life-long disability or you may get amputated.
Fluid splashed in the eyes or on the skin can also cause serious injury.
<<Emergency Medical Treatment: A Must>>
If a high-pressure fluid splashes on your skin or into the eyes, go immediately to a
specialist and tell him/her exactly what type of paint fluid you were using in order to obtain
proper medical treatment.
●
Don’t point the gun at anyone or at any part of your body.
Stay away from the trajectory of spray jet from the nozzle.
●
Don’t put your hand or fingers over the spray nozzle.
●
Don’t attempt to use the painting equipment -- until you are fully acquainted with its operation.
●
Be extra vigilant when operating an air-spray painting equipment.
<<Spray Gun Safety Mechanisms>
●
The spray gun is equipped with safety mechanisms. Use them properly.
●
Each time you use a spray gun, check to see, in advance, if all the safety mechanisms operate
properly.
●
Do not alter or modify or remove any part of the gun: the gun may behave unexpectedly and
personal injury may result.
□
Trigger Lock
●
When not spraying, always lock the trigger safety lock in order to disable trigger.
If you forget to lock the trigger, it may be pulled accidentally.
□
Chip Guard
●
When spraying, always put the chip guard on the gun.
The chip guard alerts injection hazard, reducing occurrences as a result.
The guard, however, cannot prevent hand or part of body from getting close to the nozzle
accidentally.
□
Trigger Guard
●
Don’t spray with the trigger guard removed. This guard prevents the trigger from being pulled
accidentally when the gun is dropped or hit by something.
WARNING
