BEAVER 8･8F
2
OPERATING INSTRUCTIONS
-Always ground the machine to avoid electric shock or resultant death.
-Do not touch the plug with wet hands.
-Do not expose the machine to rain and water and do not use it in damp or wet
locations. Humidity will deteriorate motor insulation or lead to electric shock.
-Immediately replace Power Plug, Power Cord or extension cord, if damaged.
-Do not hold the Power Cord and pull it to disconnect from the receptacle and do
not put the machine on the cord and damage it.
-An extension cord used should be a three-core cabtyre cable having an earth wire.
Use a thick and durable cord for outdoor use.
-Always use the machine at the voltage indicated on Machine Plate.
Otherwise, the machine may become hot, emit smoke or catch fire.
-At cutting do not force the machine in a manner that the motor stops due to an
overload switch.
-Immediately replace the Power Plug, Power Cord and extension cord, if damaged.
-If the machine has emitted smoke or took fire, do not disassemble it but have it
inspected or repaired by a qualified person.
-Never install an earth wire to the gas pipe. If attempted, explosion may take place.
-Do not use the machine in the presence of flammable liquids or gases such as
gasoline and thinner. Otherwise, ignition or explosion may take place.
-The machine and other parts coast for a while after the switch is turned off.
Never touch them while they are moving.
-Cut surfaces are very sharp and do not touch them with your hands.
-When it is required to touch the saw blade and moving parts for replacement, etc.,
switch off the machine and unplug it before starting that operation.
罫線消え対策
Summary of Contents for BEAVER 8
Page 26: ...BEAVER 8 8F 25 ...
Page 27: ...BEAVER 8 8F 26 ...
