BEAVER 8・8F
16
3-2)
Flat Vise Type
(1)Loosen the hexagon head bolt two places.
(2)Set the Flat Vise-R to the cutting angle on the scale and tighten the Hex Bolt in the Flat Vise-R.[ Fig.9 ]
(3)The Flat Vise-F is of quick clamping type. Move the Flat Vise-F toward the work and turn the clamp
handwheel to tighten the workpiece quickly.
4) Adjustment of cutting speed
-Choose the T.P.I Blade, considering also shape of the materials.
Refer to the Instruction manual p11-12 Saw Blade and Cutting Load Selecting Chart.
-Operate the cutting speed which matches the workpiece.
If you use wrong T.P.I Blade or wrong cutting speed, blade won’t work well and it will be
broken.
(1) With the Frame raised up, adjust the weight setting to the value indicated
on cutting speed chart on the machine or the Instruction manual p11 for
the material to be cut.
For this weight adjustment, press down the Change Cap and set it in the
groove of required setting.
<Fig.7>
Change Cap
Clamp
Handle
Scale plate
Hex bolt
Flat vise-R
Flat vise-F
<Fig.6>
Summary of Contents for BEAVER 8
Page 26: ...BEAVER 8 8F 25 ...
Page 27: ...BEAVER 8 8F 26 ...