PIPE SAW 400SA
2
● To prevent accidents such as fire, electrical shock and injury, always follow the "SAFETY INSTRUCTIONS" described below.
● Before using the machine, read all "SAFETY INSTRUCTIONS" to use it correctly according to the instructions.
● After reading the instructions, save this manual so that you can read it when necessary.
SAFETY INSTRUCTIONS
◆ Avoid dangerous environment.
Do not expose the machine to rain or water and do not use it in damp or wet locations. Humidity
will deteriorate motor insulation or lead to electrical shock.
◆ Use safety goggles.
Wear safety goggles while operating the machine. Also use a face or dust mask if operation
creates dust. Sawdust and dirt may enter your eyes and nose.
◆ Secure work piece.
Use clamps or a vise as described in the manual to hold a workpiece securely.
An insecure workpiece will lead to accident or injury.
◆ Use only the specified accessories and attachments.
Use only the accessories and attachments given in this manual and our catalogs.
A failure to do so will lead to accident or injury.
◆ Never touch the saw blade and moving parts until you have confirmed a
complete stop.
When it is required to touch the saw blade or moving parts for replacement, etc., switch off the
machine and unplug it before starting.
If the machine remains plugged in, it may start suddenly, leading to an accident or injury.
◆ Remove Air Hose from the machine after stopping Air Compressor and
closing Ball Valve of the unit in following the cases.
・ When not in use or when servicing, cleaning, checking or replacing parts.
・ When replacing accessories such as saw blade.
・ When hazard is predictable (including a power failure).
If Air Hose remains connected to the machine, it may start suddenly, leading to a serious injury.
◆ If you feel something unusual, stop the machine immediately.
Immediately stop the machine if something is wrong with the machine or you have noticed
unusual smell, vibration, sound etc. during operation. Refer to page 22 "TROUBLESHOOTING" in
this manual and follow the corresponding instructions.
If you use the machine without taking any action, it will overheat, emit smoke or take fire, leading
to accident or injury.
◆ Keep your work area clean.
Keep your work bench and area tidy and well.
Cluttered area and bench invite injury.
WARNING