PIPE SAW 400SA
14
① Close Ball Valve and connect the machine to
Air Maintenance Unit.
② Connect Air Maintenance Unit to Air Compressor.
Air compressor
Air Maintenance Unit
Air Hose 1m
Air Hose 9m
Plug
Ball valve
Close
Installation of Air Maintenance Unit and Air Compressor
U－notch
Guide plate
Set
2
Guide plate
fixing nut
Guide plate
fixing nut
Clamp
3
How to set the guide plate
① Select the guide plate conforming to the size of
saw blade．
② Set U − notch of "guide plate" to the "guide
plate fixing bolt"（2spots）with the back of the
saw blade passes through the gap of "guide."
③ Fix the "guide plate fixing nut" (2spots）with
the attached ratchet wrench．
◆ Additional extension air hose
should not exceed 10m.
◆ Inner diameter of the extension air
hose should be 9mm or more.
If the conditions above are not satisfied,
the air flow rate will not be secured which
causes a lack of the performance.
CAUTION