AS RTP9007S, Operation Manual

Page: 20 / 44

English
tester RTP9007S
18
Figure 19 - Diagram of voltage regulator ARE1054 connection to the tester
Figure 20 shows a diagram of voltage regulator ARE6076 connection as an example.
Figure 20 - Voltage regulator ARE6076
The voltage regulator type is identified by the terminal contacts and based on the information
set out in Appendices 1, 2. In the example given, terminals IG, S, FR(M) do not identify the type
of the voltage regulator. Terminal L identifies it as a Lamp type.
Then we refer to Appendix 1 to determine which clips (connectors) of the diagnostic cable must
be connected to the voltage regulator. The connection diagram of voltage regulator ARE6076 is
shown in both Table 3 and Figure 21.