AS RTP9007S, Operation Manual, Page: 22 / 44

English
tester RTP9007S
20
Figure 22 shows the connection diagram of voltage regulator ARE6149P as an example.
Figure 22. Voltage regulator ARE6149P
The voltage regulator type is identified by terminal contacts and based on the information set
out in Appendices 1, 2. There is only one terminal – LIN, which identifies this voltage regulator
as COM type.
Consult Appendix 1 to determine which clips (connectors) of the diagnostic cable must be
connected to the voltage regulator. The diagram of voltage regulator ARE6149P connection to
the tester is shown in both Table 4 and Figure 23.
Table 4 – Connection of voltage regulator ARE6149P to the tester
Voltage regulator
terminal
Tester output
terminal
Color marking
of cable
B+ B+ red
F F1 green
Ps ST1 blue
LIN GC yellow
G
B- black
F2 green