Page 9 / 49
b.
Be careful not to produce sparks with the cable terminal, when charging the battery
or starting the engine with an auxiliary battery.
c.
Protect your eyes, when working near the batteries.
d.
Provide for good ventilation during charging or work in closed rooms.
Should you by accident get electrolyte on your skin, into your eyes or you swallow it, you
must start the following treatment:
Skin:
Wash with cold water.
Eyes:
Wash with cold water and consult medical aid immediately.
Internal: Consult medical aid immediately.
5.
During welding at the AS-751 RC:
Always remove the positive from the battery of the machine and engage the emergency
stop button of the machine and remove the key from the emergency stop button.
6.
Always replace any safety guard, which has been removed to make an adjustment or to
carry out routine maintenance. Always ensure that all nuts, bolts, screws, etc. are correctly
tightened after making adjustments. Please see the section 'Torque Moment'. The first
control is to be carried out after 8 hours’ of operation. Account for all tools before
replacing guards or before starting the machine.
7.
Make sure that all persons are clear of machinery and visible to the operator before
starting the machine.
8.
Use only original A/S’ spare parts.
9.
Stop working and clean the machinery from dust regularly in order to prevent overheating
of the machine.
