35
Uneven cut, lawn be-
comes unsightly
Blade is dull or worn.
Have blade resharpened and balanced
by an authorised service centre. Re-
place a damaged blade immediately.
Speed is too high proportion-
ately to the cutting height.
Reduce speed and/or select the correct
cutting height.
Housing of the mower is heavily
contaminated.
Clean.
Different tire pressure.
Check the tire pressure.
Mulching result with
high plant material
not satisfactory
Speed is too high.
Reduce speed.
Mulching result with
low plant material not
satisfactory
Plant material is ejected too
quickly.
Increase speed.
Discharge channel is
jammed
Mowed grass was too long or
too damp.
Adjust cutting height and mowing speed
to the mowing conditions.
Blade is worn.
Authorised service centre.
Engine speed is too low despite
full power.
Authorised service centre.
The device does not
stop when the brake
is activated
Brake is adjusted incorrectly,
worn, or defective.
Check the parking brake (see Mainten-
ance). Authorised service centre.
The device does not
stop
Drive belt does not declutch.
Authorised service centre.
The engine does not
switch off
Switching off system is defect-
ive.
Close the fuel valve.
Authorised service centre.
The tires become flat
Thorns or sharp objects dam-
age the tires.
If necessary, use tire protection gel (au-
thorised service centre).
