background image

AS-Motor Germany GmbH & Co. KG
Ellwanger Straße 15
D-74424 Bühlertann
www.as-motor.de

THE HIGH GRASS MOWER AND 2 STROKE ENGINE MANUFACTURE

AS-Motor is your premium manufacturer for lawn and high grass mowers as well as 2 stroke en-
gines. We offer our customers professional technology for steep slopes, rough terrain, and lawn
care. Our extensive product range which includes hand-held entry-level devices up to the world’s
first all-wheel ride-on mower with remote control will always offer private customers, municipalities
service providers the right product. For more than 60 years, we have been developing and produ-
cing with a high production depth in Southern Germany and supply our dealer network in more
than 30 countries all over the world.

Mulching mower

Mulching mower – the time-saving alternative!
AS-Motor mulching mowers shred the grass to create such a fine mulch,
almost an “invisible” fertiliser, that sinks right away back into the lawn.
Disposal of the cuttings is not required.

Professional lawn
mower

Professional lawn mowers with rear or side discharge for every require-
ment, even with all-wheel drive, brake and reverse gear.

Brush cutter

®

An agile lawn mower for maintenance of extensive grassed areas. The
Allmäher® reliably mows and mulches metre-high grass, brushes and
weeds.

Flail mower

High grass with undergrowth, steep slope or extensive areas in unknown
terrain? The movably mounted flail blades of the AS-Motor flail mower
give way to rocks and obstacles and chop the cuttings several times
over.

Ride-on brush 
cutter

If extensive areas, weeds and undergrowth up to 1.2 m, the AS‑Motor all-
wheel mowers are also perfect for steep and even extremely steep ter-
rain. Ease of use and high area performance combined in one compact
ride-on mower. For more safety, comfort and efficiency in difficult terrain
we have developed the innovative and the world’s first remote controlled
ride-on mower.

Rotary mower

The cost-effective alternative to the cutter-bar mower. Also ideal for feed
production. The grass is not shredded but deposited in straight rows as a
windrow next to the machine.

Weed remover

Careful and chemical-free weed removal. The AS‑Motor weed removers
“WeedHex” mechanically clean paved areas and curb stones from grow-
ing weeds – quickly, safely, and efficiently.

Summary of Contents for Allmaher AS 65 2T ES









































Reviews: