19
ARZUM
The water to use in your Steam Station:
Your Steam Station has been designed to operate using tap water.
However, if your water is very hard, mix 50% tap water 50% distilled
water. Do not add anything to the contents of the removable water
tank and do not use water from clothes dryers, scented or softened
water, water from refrigerators, batteries or air conditioners and rain
water. These contain organic waste or mineral elements that become
concentrated when heated and cause spitting, brown staining or
premature wear to the Steam Station. Use of these types of water will
negate the guarantee provided with the product.
USING YOUR STEAM STATION
• Pull sufficient amount of cable from cable housing.
• Plug in the iron.
• Press On/Off
button and select the
desired steam setting
(ECO or normal)
by pressing steam
adjustment button
(set). Iron ready light
will flash until the steam of your iron is ready. Your iron is ready to use
when lights stop flashing.
• When lights stop flashing, it means there is
enough steam for ironing. Sufficient amount
of steam will be ready in the Steam Station in
approximately 1 minutes.
• Digital control panel shows steam mode you
select with indicator light (Eco or Standard).
• Iron ready light will start to flash when the set temperature is reached.
Do not use your iron until the iron ready light indicator is ready.
• Press the steam trigger under the handle of
the iron to get steam. Steam will stop when
you release the steam trigger.
EN
EN
