USER MANUAL [1.4]
Page 21
ATTENTION:
THE POSITIVE WIRE OF DC POWER SUPPLY IS CONNECTED LEAST
OF ALL AND ALL TIMES THROUGH A 2A FUSE, WHICH IS PLACED AS CLOSE AS
POSSIBLE TO THE CONNECTION POINT TO THE ONBOARD NETWORK OF THE OBJECT.
ATTENTION:
NO SHARP BENDS OF THE ANTENNA CABLES ARE ALLOWED.
GUIDELINES FOR CONNECTING
The device is made in the form of a monoblock and requires a minimum number of connections
for normal operation. The minimum set of actions required for the operation of the device is as follows:
1.
Insert a SIM card(s)
2.
Connect the internal battery of the device
3.
Close the housing
4.
Connect the navigation antenna to the corresponding connector on the housing
5.
Connect the GSM antenna to the corresponding connector on the housing
6.
Connect power to the device (red and black wires of the main harness)
7.
The remaining wires of the harness are connected as required by the necessary
functionality. The device is designed to be installed inside the cabin or luggage compartment of
the vehicle.
Depending on the type of the vehicle, it is preferable to install the device, for example, under the
dashboard, behind the dashboard, behind the centre console, behind the glove box, behind the upholstery
(at the left and right) of the luggage compartment if they are rigid, with a complex mount that makes it
difficult to dismantle them, in the cabin under the carpets, under the right passenger or driver seat, etc.
The navigation antenna is placed horizontally. The arrow marked on the side surface of the
antenna housing should point upwards. It is allowed to install the antenna directly on top of the metal
elements of the vehicle structure. To install the antenna, it is necessary to choose a place that provides
the maximum field of view of the upper hemisphere of the space that is not shaded by metal and non-
radio-transparent elements of the vehicle structure.
