Installation and Getting Started | Installation and Getting Started Guide
24
2. Use a #1 Phillips (cross-head) screwdriver and attach the mounting brackets to the switch with the
included 8-mm M4 screws.
Wall anchors are included in the accessory kit for use with plastered brick or concrete walls.
A third 20-mm M4 tap screw can be placed against one surface of the switch to secure it.
Under-Table Mounting
All switches can be mounted beneath a table.
For under-table mounting, a third 20-mm M4 tap screw can be placed against one side of the switch to
secure it in place.
For safe operation, please read
Installation Precautions and Guidelines
before mounting the switch.
R8R47A, R8R48A, R8R49A, and R8R50A must be mounted top surface up using the brackets provided.
The switch should be mounted only to a wall or wood surface that is at least 1/2-inch (12.7 mm) plywood
or its equivalent.
To mount the switch, follow the same steps listed for Wall Mounting, using screws only. No anchors are
necessary for installation.
Horizontal Surface Mounting
All 1430 switches can be mounted on a horizontal surface.
Place the switch on a table or other horizontal surface. The switch comes with rubber feet in the accessory
kit that can be used to help keep the switch from sliding on the surface.
Attach the rubber feet to the four corners on the bottom of the switch within the embossed angled lines.
Use a sturdy surface in an uncluttered area. You may want to secure the networking cables and switch
power cord to the table leg or other part of the surface structure to help prevent tripping over the cords.
