Installation Overview |
21
the bracket holes, then insert and tighten the four 12-24 screws holding the brackets to the rack.
Wall Mounting
You can mount all switches on a wall with either the front or rear panel facing up.
For safe operation, please read
Installation Precautions and Guidelines
before mounting the switch.
Wall mount the switch with the network ports facing up or down.
The switch should be mounted only to a wall or wood surface that is at least 1/2-inch (12.7 mm) plywood
or its equivalent.
To mount the 16PoE, 16-, 24- and 26-port switches, follow these steps:
1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting brackets to the switch with the
included 8-mm M4 screws.
2. Attach the switch to the wall or wood surface with two 5/8-inch number 12 wood screws (not
included).
