Back of the switch
The back of 8360 switches include two power supply units and three fan trays.
Figure 7: Back of the Aruba 8360 switch
3
2
1
6
7
8
9
4
5
10
Table 9: Back of the Aruba 8360 switch labels and descriptions
Label
Description
1
Global Status LED
2
Unit Identification/Locator LED
3
RJ-45 Serial Console Port
4
Fan Trays (1-3)
5
Power Supplies (1-2)
6
Power Supply Status LED
7
AC Inlet (C14 socket)
8
Power Supply Status LED
9
AC Inlet (C14 socket)
10
Optional Ground Lug mounting location
Management ports
Console port (RJ-45)
The RJ-45 console port is used for CLI serial port access.
NOTE: RJ-45 and USB-C console ports provide CLI serial port access. The system will output to
both consoles simultaneously, but the system will only accept input from one console port. If
both RJ-45 and USB-C are connected, USB-C has priority.
Power supplies
The Aruba 8360 switch does not have a power switch; it is powered on when at least one installed power
supply is connected to an active AC power source. The power supplies automatically adjust to any voltage
between 100-127 and 200-240 volts and either 50 or 60 Hz. There are no voltage range settings required.
Chapter 2 Introducing the switches
17
