Aruba Networks PowerConnect W-AP124 Installation Manual Download

Page: 7 / 8

AP-120-MNT-CV Access Point Enclosure

| Installation Guide

7. Before installing the cover, you must clear the access cutout to allow the antenna to extend. The

access is shown in

Figure 11

8. Once the AP is secured to the ceiling rail, install the cover by placing the hooks on the cover into the

holes on the bottom of the base (

Figure 11

). Push the top of the cover towards to base until it clicks

into places.

Figure 11

Installing the cover

Figure 12

Completed ceiling installation

AP120_002

Access

cutout

Summary of Contents for PowerConnect W-AP124

Page 2: ...d junction box Figure 1 Save the screws Figure 1 Removing the installed cover plate b Identify the Ethernet cable or cables that will be connected to the AP 121 or AP 125 The Ethernet cable must have a male RJ 45 connector c Attach the mounting plate to the junction box using the screws from the removed cover plate Figure 2 Figure 2 Installing the mounting plate AP120_001 ...

Page 5: ...on a ceiling rail 1 Place the AP into the base Figure 7 Place the top AP into the hooks on the base and align the back of the AP with the large opening in the base Figure 7 AP Installed in base 2 Install the ceiling rail adapter that matches your ceiling rails Figure 8 Figure 8 Installing the AP ceiling rail adapter 3 AP120_007 ...

Page 7: ...end The access is shown in Figure 11 8 Once the AP is secured to the ceiling rail install the cover by placing the hooks on the cover into the holes on the bottom of the base Figure 11 Push the top of the cover towards to base until it clicks into places Figure 11 Installing the cover Figure 12 Completed ceiling installation AP120_002 Access cutout ...