2
AP-120-MNT-CV Access Point Enclosure
| Installation Guide
Installing the AP-120-MNT-CV on a Wall
1. Attach the base plate as follows:
a. Remove the cover plate from an installed junction box (
Figure 1
). Save the screws.
Figure 1
Removing the installed cover plate
b. Identify the Ethernet cable or cables that will be connected to the AP-121 or AP-125. The
Ethernet cable must have a male RJ-45 connector.
c. Attach the mounting plate to the junction box using the screws from the removed cover plate
(
Figure 2
).
Figure 2
Installing the mounting plate
AP120_001
