Arturia TAE ORIGIN User Manual Download Page 73

Page: 73 / 164

ARTURIA – ORIGIN – USER’S MANUAL

Moving a Filter module

Highlight the module you wish to move using the jog dial or [

▲

▼

] or [

◄

►

] buttons on the

front panel of the Origin and press [Move].

The [Move] button turns black and you can now move the highlighted module using the jog dial

or [

▲

▼

] or [

◄

►

] buttons.

When you positioned the module to the desired location, press the [Move] button which will

then return to its normal state.

Note that moving modules has no effect in the [Rack] view, nor does it has any impact on the

sound or functioning of you patch.

8.4.3.5

[Remove]

The second button along the top of the LCD panel allows you to delete a module from the view.

Simply highlight the targeted module using the jog dial or [

▲

▼

] or [

◄

►

] buttons on the

front panel of the Origin, and press the [Remove] button.

Removing a module

NOTE:

If you have an empty RACK slot highlighted, the [Remove] button is inactive.

Summary of Contents for TAE ORIGIN





































































































































































Search results

Summary of Contents for TAE ORIGIN

Reviews:

Arturia TAE ORIGIN, User Manual, Page: 73 / 164

Search results

Summary of Contents for TAE ORIGIN

Reviews: