5. THE TOP PANEL
This chapter covers the synthesizer features of the MiniBrute 2: the oscillators, the filter, the
envelopes, etc. Click the following links for descriptions of the
, the
section, the
and
, and the
settings.
5.1. The LFOs
An LFO is low frequency oscillator that can produce various waveforms at sub-audio
frequencies (0.0625Hz up to 100Hz). The MiniBrute 2 provides two LFOs, each with
waveform choices of sine, triangle, sawtooth, square, two types of random waves.
Each LFO has its own Wave selector, Rate control, a switch that determines whether it will
run freely or synchronize to the master clock.
♪
: LFO 1 and 2 are identical, so this section of the manual applies equally to both.
5.1.1. Wave
The LFOs offer several types of modulation waveforms. The selection is made by the
Wave
knob: sine, triangle, sawtooth, square, random stepped (also referred to as Sample & Hold),
and random gliding (or smoothed random).
•
Sine
rises and falls smoothly between its minimum and maximum values
•
Triangle
rises and falls in more of a linear manner between its minimum and
maximum values
•
Sawtooth
falls to its minimum value in a linear manner and then rises suddenly
to its maximum value
•
Square
rises and falls suddenly between its minimum and maximum values
•
Random stepped
rises and falls suddenly between values that are generated at
random
•
Random gliding
rises and falls gradually between values that are generated at
random
The LFO 1 section
Arturia - User Manual MiniBrute 2 - The top panel
22
Summary of Contents for minibrute 2 series
Page 1: ...USER MANUAL...
