___________________________________________________________________________________
ARTURIA – JUPITER-8V – MANUAL - EN
90
Open the Galaxy module to complete the rhythm. This will modulate the volume of the VCA
to create "gate" effects that are often used in electronic music.
Click on "Output X' (situated to right of galaxy) and choose "VCA" as destination of
modulation controlled by LFO 1 (axis "X'S").
Do the same for the first destination of the axis "Y" while choosing also the destination "VCA"
set the two levels of modulation to the range of 0.600
Sync the Galaxy module to MIDI « Sync »
Select the speed of the LFO while clicking on « Q » (For « Quantized ») select a value
« 1/8 ».
Galaxy completes the sequence played by the step sequencer to finish your sound.
Setting of the « Galaxy » module
Finally the preset consists of:
•
2 VCOs (VCO2 as a 7
th
)
•
A high pass filter (HPF)
•
A low pass filter (VCF)
•
An ADSR envelope connected to the filter
•
An ADSR envelope connected to the amplifier
•
The Galaxy module
•
The Arpeggiator
•
The step sequencer modulating the frequency of the VCF
•
The Galaxy module modulating the volume of the VCA
•
A LFO modulating the square waveform of VCO2
•
Patch effect « Chorus / Flanger »
•
Patch effect « St Delay »
These sound examples present different levels of difficulty. We hope that they have allowed you to
discover a part of the possibilities that the Jupiter-8V offers. But do not hesitate to do your own
experimentations. This is the fastest way to master the Jupiter-8V and create original sounds.
