___________________________________________________________________________________
ARTURIA – JUPITER-8V – MANUAL - EN
52
•
The high pass filter 6dB /oct (HPF)
The high pass filter, eliminates the bass frequencies while it lets the high frequencies go thru. The
sound will become then more "Thin". It is very useful to remove bass frequencies of a pad sound for
example.
The non-resonant high pass filter
•
The low pass filter 12 or 24dB /oct (LP 24)
The low pass filter is typical for the Jupiter-8V. It eliminates the frequencies situated above the
frequency setting (the cut off frequency). The resonance amplifies the frequencies near to the cut
off frequency. Turn this knob toward the right, and the filter will become more selective. At
extreme settings, the sound will eventually begin to "to whistle" as the filter begins to self-oscillate.
Note that the filtering will be less strong with the filter type set on 12 dB instead of 24 dB.
Notice!
For hosts that allow “linear” control of knobs and sliders, right click the mouse or CTRL + CLICK on MAC for
additional precision. This is useful when you will try to regulate the level of the cut off frequency precisely, for example.
When in “circular” control mode, simply click on the knob and drag the mouse pointer out into a broader arc for a more
precise setting.
Resonant low pass filter
