___________________________________________________________________________________
ARTURIA – JUPITER-8V – MANUAL - EN
49
LOW FREQ :
Switch for "THE FREQ /NORMAL" (low frequencies / audible frequencies), of VCO 2, of
which the oscillation frequency is lower, and enables you to use it as a LFO to modulate
the frequency of the VCO1.
FINE TUNE
: knob to fine tune with the range of a half tone + or -
SHAPE
: Switch for the four waveforms :
•
Sine
•
Saw Tooth
•
Variable Pulse
•
White noise
The white noise waveform brings an interesting complement to the sonic possibilities. It very useful to create breath
effects (flute tones for example) or special effects as the noise of the wind for example.
SYNC
: knob to set the impulse width of the saw tooth, square and triangle
Here are some of the representations of the different waveforms used by the oscillators of the
Jupiter-8V
Saw tooth
square
