9
SAFETY PRECAUTIONS
CAUTION
•
Contact the sales representative
or service center for internal
cleaning of the projector about
once a year.
-
If you do not clean the
projector, dust will accumulate
inside and may create a fire
hazard or malfunction.
•
When cleaning plastic parts,
such as the projector case,
disconnect the product from the
power first and wipe with a soft
cloth. Do not spray with water
or wipe with a wet cloth. Never
use glass cleaner, automobile
or industrial polish, abrasives
or wax, benzene, alcohol, etc.
when cleaning plastic parts,
such as the projector case as
they can damage the product.
-
This may also create a fire
hazard, result in electric
shock or product damage
(deformation, corrosion or
breakage).
•
Remove the plug from the outlet
before cleaning the product.
-
Otherwise, this may result in
electric shock.
Others
WARNING
•
When you go out, place the
projector out of reach of
animals, and remove the power
plug from the wall outlet.
-
Using a damaged power cord
may result in short circuit
or fire.
•
Do not use the projector near
high-precision electronic devices
or those that transmit weak
radio signal.
-
This may affect the operation
of the product, causing an
accident.
•
Only a qualified technician
can disassemble or modify
the projector. For diagnosis,
adjustment, or repair, contact
your seller or our service center.
-
This may result in fire or
electric shock.
•
Do not stare directly into lens
when in operation; eye damage
can occur.
•
No user serviceable parts
inside unit. High voltage parts
can cause shock and even
electrocution.
•
Proper ventilation required, do
not block airflow around unit.
Doing so can cause injury and
internal overheating.
•
To prevent damage to lamp,
unit must remain plugged in for
approximately 3 minutes after
power down to allow for proper
cool down (not applicable on
LED models).
Summary of Contents for Flare100
Page 1: ......
