EFT/ Burst Generator PEFT Junior
33
6.1.2 Burst output BURST OUTPUT
The PEFT Junior delivers the burst :
- direct to the high voltage output.
For example, when coupling into data lines using the IP4A.
- through the integrated single phase filter.
For coupling into the single phase supply of an EUT connected to the coupling filter output.
- through the external three phase filter.
For coupling into three phase mains using the FP-EFT 32.1.
HAEFELY
P90.1
CONTROL UNIT
F1
F2
F3
F4
Burst output:
→
-TO HV-OUT YES
-TO LINE 1PHASE ...
-TO LINE 3PHASE ...
→
Only one of the outputs can be selected
Burst output
menu
6.1.2.1 Direct output TO HV-OUT
Press (F2), to select burst output to high voltage connector.
6.1.2.2 Coupling to single phase mains TO LINE 1PHASE
Press (F3), to select burst output to the integrated single phase filter.
6.1.2.3 Coupling to three phase mains TO LINE 3PHASE
Press (F4), to select burst output to high voltage connector. The three phase coupling filter FP-
EFT 32.1 is connected to the P90 EXTENSION, it is possible to select all the coupling paths
required by the standard.
This mode is exclusively for use with the Haefely FP-EFT 32.1 in single or three phase
applications.
After selecting the coupling mode, the next menu enables definition of the coupling path.