artisan PEFT Junior User Manual Download Page 33 | Manualshive

Page: 33 / 89

artisan PEFT Junior User Manual Download Page 33

24

EFT/ Burst Generator PEFT Junior

5. Test set up

5.1 Instruction for set up

Before using the PEFT Junior, this user manual should be read carefully.

5.2 Operating personnel

Operating the PEFT Junior without having read the user instructions, can expose the operator to
potential dangers.
It is recommended that only trained personnel be allowed to operate the PEFT Junior.

WARNING

Persons with heart pacemakers must not be

in the area when the PEFT Junior is

operating

.

Remember:
the presence of high voltages is a potential danger even to trained personnel.

5.3 Initial operation

Before initial operation, please check the following points:

5.3.1 Optical control

During transport, all material is subjected to vibrations and mechanical shocks. Before initial
operation check for mechanical damage. All modules and blank plates should be fitted so that
they make good contact with the chassis.

5.3.2 Mains power

Check the mains power available in your laboratory is compatible with the PEFT Junior.
The mains voltages and frequencies are given in section 1.4

«
...
31
32
33
34
35
...
»

Summary of Contents for PEFT Junior


























































































Reviews:

No comments