•
Setting int ermediate limits
•
Erasing an intermediate limit
•
Readjusting the lower or
an intermediate limit
•
Setting the motor into “sleep mode”
•
“Waking up” the motor
•
Adding an additional remote or
“cloning” a channel
•
Changing to tilt or jog mode
•
Deleting a single motor or channel
•
Deleting all channels
•
Resetting the motor to factory default
Optional functions
Initial programming sequence
Before starting...
It is extremely important to charge battery motors for at least 8 hours on initial charge, prior to
installation.
1
Select the desired remote control and channel.
2
Pair the motor with the remote control.
3
Check the direction of rotation of the motor
and change it if needed.
4
Set the upper limit.
The upper limit must always be set first.
5
Set the lower limit.
UP OR
DOWN?
2
