Pairing the motor with the remote control
1.
Press and hold the
programming button
on the
head of the motor until the moto
r
“jogs”
.
2.
Select the desired channel and press the
up button
until the motor
“jogs”
.
Now the motor
is paired with the remote control.
3
PROGRAMMING
BUTTON
UP
BUTTON
STOP
BUTTON
This function must be done before setting the limits and is convenient when the need arises to
change the rotation of the motor. For example, when pressing the
up button
on the remote
control, the shade goes down, or when pressing the
down button
, the shade goes up.
Checking the direction of rotation
1.
Press and hold the
stop button
for about
5 s
until the motor
“jogs”
.
2.
Release the
stop button
, and press the
down
button
for about
2 s
.
The motor has now changed
its direction.
DOWN
BUTTON
The upper limit must be set first and cannot be erased or modified once it has been set. If you
have
made a mistake setting the upper limit, reset the motor to factory default setting and start the
initial programming sequence again.
Setting the upper limit
1.
Using the remote, move the shade and stop it
approximately
4"
below
the desired upper limit
position. Press and hold the
programming button
located on the back of the remote until the
motor
“jogs”
.
2.
Move the shade up to the desired upper limit
position and then press and hold the
program ming
button
until the motor
“jogs”
again. The upper
limit is now set.
UPPER
LIMIT
PROGRAMMING
BUTTON
~4”
PROGRAMMING
BUTTON
