Artila Matrix-500, User Manual

Page: 5 / 19

Matrix-500 User Guide
‧
1
‧
1. Introduction
Matrix-500 features four serial ports, 10/100Mbps Ethernet, USB port and SD socket for flash disk
expansion. The pre-install Linux OS and GNU tool chain make Matrix-500 ready for your application
development.
1.1 Features

ARM920T ARM Thumb Processor with 200MIPS at 180MHz, Memory Management Unit

16-KByte Data Cache and 16-KByte Instruction Cache

64MB SDRAM, 16MB Flash on board

One 10/100Mbps Ethernet

Two USB 2.0 full speed (12Mbps) Host Ports

Multimedia Card Interface for SD memory card

One 3-in-1 RS-232/422/485 ports and three RS-232 ports

16 General Purpose DIO inside box

9 to 48VDC power input

Pre-installed Standard Linux 2.6.14 OS

GNU toolchain available on Artila FTP

Optional DIN RAIL mounting adaptor
1.2 Packing List

Matrix-500
1.3 Optional Accessory

CB-RJ45F9-150 (91-R45F9-150): Serial Cable (RJ45 to DB9 Female, 150cm)

CB-RJ2CON-100 (91-RJCON-100): Console Cable (RJ45 to DB9 Female, 100cm)

DK-35A (36-DK35A-000): DIN RAIL Mounting Kit

PWR-12V-1A (31-62100-000): 110~240VAC to 12VDC 1A Power Adaptor