manualshive.com logo in svg

Arthrex AR-9600, User Manual, Page: 5 / 52

Share
Download
Arthrex AR-9600 User Manual Download Page 5

Maintaining the Arthrex O.P.E.S. Electrosurgical Generator ...........................................5-1

Cleaning ..........................................................................................................................5-2
Periodic Inspection..........................................................................................................5-2
Fuse Replacement ..........................................................................................................5-2

Troubleshooting ....................................................................................................................6-1

Error Codes and Audio Tones .................................................................................6-2

Repair Policy and Procedures .............................................................................................7-1

Responsibility of the Manufacturer..................................................................................7-2
Returning the Generator for Service ...............................................................................7-2

Step 1 – Obtain a Returned Authorization Number ................................................7-2
Step 2 – Clean the Generator .................................................................................7-2
Step 3 – Ship the Generator ...................................................................................7-2

Technical Specifications......................................................................................................A-1

Performance Characteristics...........................................................................................A-2

Input Power.............................................................................................................A-2
Duty Cycle...............................................................................................................A-2
Dimensions and Weight ..........................................................................................A-2
Operating Parameters.............................................................................................A-2
Transport and Storage ............................................................................................A-2
Audio Volume..........................................................................................................A-3
Return Electrode Sensing .......................................................................................A-3
Low Frequency (50-60 Hz) Leakage Current .........................................................A-3
High Frequency (RF) Leakage Current ..................................................................A-4

Standards and IEC Classifications .................................................................................A-4

Class I Equipment (IEC 60601-1) ...........................................................................A-4
Type CF Equipment (IEC 60601-1) / Defibrillator Proof .........................................A-4
Drip Proof (IEC 60601-2-2).....................................................................................A-4
Electromagnetic Interference ..................................................................................A-4
Electromagnetic Compatibility (IEC 60601-1-2 and IEC 60601-2-2) ......................A-4
Voltage Transients (Emergency Generator Mains Transfer) ..................................A-4

Output Characteristics ....................................................................................................A-4

Maximum Output for Monopolar and Bipolar Modes ..............................................A-4

Output Power Curves .....................................................................................................A-5

Warranty ................................................................................................................................B-1

v

User ’s Guide • O.P.E.S. Electrosurgical Generator

Summary of Contents for AR-9600





















































Reviews:

No comments