ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
C406-2 (453-5000), C406-2HM (453-5001)
570-5000 Rev. U
Company Confidential
25-62-11
Page 10 of 66
INTRODUCTION
TASK 25-62-11-990-801
1.
Manual Usage
SUBTASK 25-62-11-990-001
A.
General
1)
This manual describes the operation, installation, and maintenance of the Model C406-2 Series
emergency locator transmitter (ELT). This information is provided to ensure initial and continued
airworthiness. Information presented in this manual is accurate at time of printing, but is subject to
change. Refer to the Artex products web site at
for the latest information and any
updates to this manual.
2)
Information on COSPAS-SARSAT emergency locator beacon registration requirements and procedures
is provided in Appendix A
ELT Registration on page 59.
3)
Web links provided in this manual were accurate at time of printing but may be subject to change.
4)
ACR Electronics reserves the right to add approved components to the ELT system; including, but not
limited to antennas, remote switches, and coaxial cables.
5)
Regulatory references contained herein are generally confined to United States and Canadian
requirements and, in any case, should not be considered all encompassing. Consult your national
aviation authority for applicable requirements.
SUBTASK 25-62-11-990-002
B.
Application
1)
This manual constitutes supporting data/documentation for the C406-2 Series ELT, including:
a)
Description and Operation
b)
Test and Fault Isolation (includes inspection criteria)
c)
Removal
d)
Installation
e)
Registration
f)
Illustrated Parts List
2)
In the United States, the C406-2 Series ELT must be installed and maintained in accordance with the
requirements herein and 14 CFR, FAR Parts 43, and 91; and other airworthiness requirements, as
applicable.
3)
In Canada, the C406-2 Series ELT must be installed and maintained in accordance with the
requirements herein and Canadian Aviation Regulations (CAR), Part V, Paragraph 551.104 and other
CAR airworthiness requirements, as applicable.
4)
C406-2 Series ELT installation and maintenance in all other countries must comply with the
requirements herein and applicable national airworthiness requirements.
5)
The accessories (i.e., remote switch and antennas) addressed in this manual are the accessories
most commonly associated with the C406-2 Series ELT. Other options, such as a different remote
switch configuration or an ELT/NAV Interface, should be installed and maintained in accordance with
the written instructions specific to the accessory.
NOTE:
Contact ACR Electronics for optional accessories approved for use with a C406-2
Series ELT.
6)
To ensure proper operation, only parts listed in the Illustrated Parts List of this manual or those
recommended by ACR Electronics may be used as replacement parts for the C406-2 Series ELT.
