Artesyn PCIE-7210-2-32GB, Installation And Use Manual, Page: 16 / 82

SharpStreamer
TM
Pro Installation and Use (6806800V01B)
Safety Notes
16
modifications not expressly approved by Artesyn Embedded Technologies could void the
user's authority to operate the equipment. Board products are tested in a representative
system to show compliance with the above mentioned requirements. A proper installation in
a compliant system will maintain the required performance. Use only shielded cables when
connecting peripherals to assure that appropriate radio frequency emissions compliance is
maintained.
Operation
Product Damage
Surface of the Product
High humidity and condensation on the product surface causes short circuits.
Do not operate the product outside the specified environmental limits.
Make sure the product is completely dry and there is no moisture on any surface before
applying power.
Overheating and Product Damage
Operating the product without forced air cooling may lead to overheating and thus damage of
the product.
When operating the product, make sure that forced air cooling is available in the enclosure.
Data Corruption
If power to the unit is removed while a firmware update is in progress to the card flash memory,
the changes will not be saved or the flash memory may be corrupted. In such case the card is
likely to remain in non-operable state and will require reconditioning by qualified repair
services.
Installation
Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the product can damage
circuits or shorten their life.
Before touching the product or electronic components, make sure that your are working in an
ESD-safe environment.