Artesyn Embedded Technology ATCA-7365-CE, Installation And Use Manual

Page: 195 / 288

Maps and Registers
ATCA-7365-CE Installation and Use (6806800L73N)
195
6.4.11 RTM SPI Interface Registers
The signals RTM_SPI_SCK, RTM_SPI_SS_, RTM_SPI_MISO and RTM_SPI_MOSI. are used to
support a SPI master protocol. The signal RTM_SPI_MISO is used to signal the base board an
ARTM interrupt. See
RTM Interrupt Status Register on page 196 .
A write access to the RTM SPI Address/Command Register starts the SPI transaction. The write
access terminates, when SPI transaction has finished.
A write access to the RTM SPI Address/Command Register with the Command Bit 0 (Write)
starts a SPI write transaction. The value of the RTM SPI Write Register is written to the SPI
device.
At the moment there is no ARTM with an SPI interface defined.
Table 6-56 RTM SPI Address/Command Register
Address Offset: 0x18
Bit Description Default Access
0 Command Bit
0: Write
1: Read 0 IPMC: r/w
7:1 RTM SPI Address bits [6:0] PWR_GOOD:0 IPMC: r/w
Table 6-57 RTM SPI Write Register
Address Offset: 0x19
Bit Description Default Access
7:0 RTM SPI write data - LPC: w