Page 3
Remotely Control ScanDo HD
Remotely Control ScanDo HD
ScanDo HD comes equipped with a RS-232 and an standard Ethernet port .
It is suggested that you review the ScanDo HD User’s Manual prior to
controlling the ScanDo HD from a remote location .
ScanDo HD ships from the factory with no presets stored .
Therefore, it is necessary for the user to store any presets they may desire
for this feature to be active .
You may store and recall presets via the RS-232 port or via the intuitive GUI .
For RS-232 instructions, please see page 8 of this manual .
For ethernet/GUI instructions, please see page 10 of this manual .
The Preset function stores the current settings based on the current output
format timing and DVI input resolution .
ScanDo HD stores the following information in its Preset memory:
• The Zoom ( H & V size ) of the image
• The Pan ( H & V position ) of the image
• All Processing Control Settings ( Brightness, Sharpness, etc . )
• The Anti-Flicker Setting
Note:
A preset may not be recalled if the output format and/or the input
resolution differs from the output format and/or input resolution saved
with the preset .
Introduction | Presets Overview
Introduction
Presets Overview
